Give your home the panel it deserves.

Gulfport and Biloxi grew fast in the 50s through the 80s, and thousands of those homes still run their original electrical service: 100-amp panels sized for an era before central air ran all summer, before every counter held an appliance, before anyone plugged in a car. Add coastal reality — salt air corroding lugs and bus bars a decade ahead of inland schedules — and the panel is usually the most tired component in an older Coast home.

Some of those panels are merely undersized. Others — Federal Pacific and Zinsco among them — carry documented failure histories serious enough that inspectors flag them on sight and insurers price around them. Knowing which you have is worth one look from a licensed electrician.

Capacity, first: room for the EV charger, the workshop, the pool equipment, the addition — with a load calculation proving it on paper instead of hoping. Safety, second: modern breakers that trip when they're supposed to, AFCI and GFCI protection where today's code requires it, and terminations torqued to spec on a bus that isn't pitted with corrosion.

And paperwork, honestly: a permitted, inspected panel with documentation answers the questions insurers and home inspectors on the Coast now ask as a matter of routine.

We coordinate the utility disconnect, swap the panel, re-terminate and label every circuit properly — the mystery-breaker era of your home ends here — and walk the inspector through it. Power is typically off for six to eight hours, restored the same day. You end the day with a labeled panel, a permit record, and a photo set of the finished work for your records.